现在无障碍升降机已经非常普遍，尤其是在医院，社区，学校，宾馆，酒店，公共场所等地方，大家到处可见。无障碍升降机可容纳轮椅车出入，它的出现给行动不方便的人带来了很大的便利。那么无障碍升降机在安装时应该注意什么呢？
1、施工场地应该要开阔，视野要宽广，地面和空中不能有障碍物。
Construction site should be open, broad vision to the ground and in the air can not have obstacles.
2、按说明书中地耐力的要求选择该要求选择该机具基础，严禁非专业安装人员安拆升降机，特别注意检查导轨底座的各条焊缝，如有异常立即处理。严格按照无障碍升降机的操作规定条件和作业顺序进行安装。
According to the instructions required to select the endurance required to select the equipment based on the non-professional installer prohibited demolition lifts, special attention to check the welds rail base, if unusual immediately. Strict accordance with the prescribed conditions and job order accessibility lifts installed.
3、选择合适的吊装设备和吊具。安装工人必须持证上岗。工作人员服从地面安装负责人统一指挥，地面人员应戴好安全帽，站在安全地方，并由专业人员做好安全警介，非安装人员严禁进入警介线内。高空作业人员应戴好安全帽，系上安全代作业.雨、雾、雪天一般不得进行安拆工作，风速超13m/s秒时不得进行安拆工作。
Select the appropriate lifting equipment and spreader. Installers must be certified. The staff person subject to the unified command responsible for ground-mounted, ground personnel should wear a helmet, standing in a safe place by the security police professionals make referrals, non-installation personnel allowed to enter the police referral line. Aerial personnel should wear a helmet, on behalf of job security. Rain, fog, snow generally not carried out the demolition work, demolition work shall be carried out wind speed over 13m / s sec.
4、未经检查或检查不合格不准进入下一安装工序。
Unchecked substandard allowed to go to the next or check the installation process.
5、确保安全装置灵敏可靠，试车、验收并移交。升降机安装完毕后，应认真检查安装过程中各部是否安全可靠，保证高度，重量限位器工作正常。
Ensure sensitive and reliable safety device, test, acceptance and surrender. After the lift is installed, the installation process should be carefully checked whether the ministries safe,reliable, guaranteed height, weight limit is working properly.